Activate Telnet on Windows 10 and Windows Server 2012 R2


Control Windows Server remotely by command line utility which is daily operation of network and system administrators. In addition, users can use Telnet to control servers. The following article will guide you how to activate Telnet on Windows 10 and Windows Server 2012 R2.


Telnet is a protocol that allows users to connect to remote computers. By default, Telnet services are not enabled on Windows Server and Client. This article will guide you how to activate Telnet on Windows 10 and Windows Server 2012 R2 or vNext Server.

Also ask you to know the Telnet port. The default Telnet port is port 23, and make sure port 23 is not blocked by Windows Firewall or Anti Virus software.

Telnet is not the best choice to control the system on the Internet, because it is not secure and the communication is not encrypted. If you want to make Telnet safer, you can use the Internet security protocol (IPSec).

Note: This article Taimienphi.vn guide you to activate Telnet on Windows 10 and Windows Server 2012 R2, but you can apply these activation steps on Windows Server 2008, Windows 7, 8 and Windows 8.1.

Activate Telnet on Windows 10 client

Taimienphi.vn will first guide you how to activate Telnet on Windows 10, then Windows Server. For a more perfect activation step, the Telnet client must be installed on both the client and the Telnet server must be installed on the server.

To activate Telnet, follow the steps below:

Access Control Panel =>Programs and Features => click to select Turn Windows Features on or off.

Or alternatively enter “optionalfeatures“into the Run command window and press Enter to open the Windows Features page.

On the Windows Features page, check the box Telnet Client then click OK, got it to install. The installation process takes a few minutes to complete, then closes the page. Thus Telnet has been successfully installed on Windows 10.

Activate Telnet on Windows Server 2012 R2

Next Taimienphi.vn will guide you how to enable Telnet on Windows Server 2012 R2 or whatever server you are using. To activate Telnet on Windows Server, you must activate it through Server Manager.

enable telnet on windows 10 and windows server 2012 r2 2

On the Server Manager window on Windows Server, click Manage then click Add Roles and Features.

enable telnet on windows 10 and windows server 2012 r2 3

On the Installation Type page, select Role-based or feature-base installation then click Next.

enable telnet on windows 10 and windows server 2012 r2 4

Select the server on which you want to install Telnet destination Server. In this test environment, the server is selected by default. Then click Next.

On the Server Role page, leave the settings as they are and then click Next.

enable telnet on windows 10 and windows server 2012 r2 5

On the Windows Feature window, select all Telnet Server and Telnet Client then click next to install, and go to the Confirmation page. On the Confirmation page, click next and wait for a few minutes.

enable telnet on windows 10 and windows server 2012 r2 6

Finally, after the installation is completed, click Close and activate Telnet service from Services. To open Services on Windows Server, enter services into the Search box to open.

enable telnet on windows 10 and windows server 2012 r2 7

On the Services page, find Telnet and double click to open Telnet properties window. Choose Automatic and click the button Start then click OK, got it to close the Services window.

Check Telnet service on Windows

The next step is to check if Telnet is working. To test Telnet, on a Windows 10 computer, open Command Prompt or PowerShell and enter the following command:

Telnet 192.168.100.2

Note 192.168.100.2 is the IP address of the server you control with Telnet.

enable telnet on windows 10 and windows server 2012 r2 8

Then press Enter and the system will ask you to update the password for the remote computer via the Internet.

enable telnet on windows 10 and windows server 2012 r2 9

Import Y then press Enter to continue.

enable telnet on windows 10 and windows server 2012 r2 10

Enter the correct username and password and press Enter.

enable telnet on windows 10 and windows server 2012 r2 11

https://thuthuat.taimienphi.vn/kich-hoat-telnet-tren-windows-10-va-windows-server-2012-r2-31491n.aspx
Here’s how to enable Telnet on Windows 10 and Windows Server 2012 R2. From now on Server 2012 R2 is completely under your control, but if this is not the right software for you, you can choose a different option. remote control computers with Teamviewer makes it possible to control any of your computers anywhere you have internet access.

.

Add a Comment

Your email address will not be published. Required fields are marked *