Cad shortcuts, summarize shortcut commands in AutoCAD

Cad shortcuts, summarize shortcut commands in AutoCAD


AutoCAD is a 2d vector graphic design software used by a lot of people as well as applied to real works. In order to design a complete drawing, it takes many stages as well as support commands when used, so it is important to remember the basic commands in AutoCAD. In this article, Betdownload.com will summarize for you shortcuts as well as shortcuts in AutoCAD.


Speaking of shortcuts in AutoCAD, there are more than 150 types of shortcuts that you will have to take time to learn and use. However, this article only mentions the most commonly used shortcuts that you must keep in mind if you want to improve your skills and save time when using AutoCAD.

To learn about AutoCAD will take a lot of your time, so Taimienphi.vn also has a lot of articles about this type of software to help readers have an overview as well as tips and utilities such as installing Fonts. AutoCAD to the reader. AND if you haven’t install Font AutoCAD you can refer to and download a series of special fonts right away. And here Taimienphi.vn will introduce to you the shortcuts and commands to note in AutoCAD.

AutoCAD shortcuts.

Shortcuts related to the screen.

Ctrl + 0: Clean the screen

Ctrl + 1: Enable object properties

Ctrl + 2: Turn on / off the Design Center window

Ctrl + 3: Turn on / off the Palette tool window

Ctrl + 4: Turn on / off the Sheet Palette window

Ctrl + 6: Enables / disables the link window for the original drawing file.

Ctrl + 7: Turn on / off the Markup Set Manager window

Ctrl + 8: Turn on the electronic computer quickly

Ctrl + 9: Enables / disables the Command window

How shortcuts relate to Modes.

F1: Turn on / off help window

F2: Enables / disables the command history window

F3: Turn on / off Snap capture

F4: Turn on / off 3D capture mode

F6: Enables / disables the UCS user coordinate system

F7: Turn on / off grid screen

F8: Enable / disable vertical or horizontal fixation of brush strokes

F9: Enable / disable accurate capture

F10: Enable / disable polar tracking mode

F11: Turn on / off resident snap to Object snap

F12: Enables / disables the dynamic input cursor display mode

film all cad in hop lenh tat in autocad

General keyboard shortcuts.

Ctrl + d: Switching the screen coordinate mode

Ctrl + g: Turn on / off grid screen

Ctrl + f: Turn on / off Snap capture

Ctrl + h: Turn on / off Group selection mode

Ctrl + Shift + h: Turns on / off all tools on the desktop

Ctrl + Shift + i: Turns on / off the restriction on the object

Shortcut drawings

Ctrl + n: Create a new drawing

Ctrl + s: Save the drawing

Ctrl + o: Open the drawings available in the machine

Ctrl + p: Opens the print dialog

Ctrl + Tab: Switches between Tabs

Ctrl + Shift + Tab: Switch to the previous drawing

Ctrl + Page Up: Switch to the previous tab in the current drawing

Ctrl + Page Down: Go to the next tab in the current drawing

Ctrl + q: Exit

Ctrl + a: Select all objects

Workflow shortcut

Ctrl + c: Copy the object

Ctrl + v: Paste the object

Ctrl + Shift + v: Paste data in blocks

Ctrl + y: Redo last action

ESC: Cancel the current command

Ctrl + x: Cut object

Ctrl + Shift + c: Copy to Clicpboard with landmarks

Ctrl + z: Undo the last action

Ctrl +[[: Cancel the current command

Common Off commands in AutoCAD.

https://thuthuat.taimienphi.vn/phim-tat-cad-tong-hop-lenh-tat-trong-autocad-5915n.aspx
film all cad in hop lenh tat in autocad

3A – 3DArray: Copy into series in 3D.

3DO – 3DOrbit: Rotate objects in 3D.

3F – 3DFace: Create 3D surface.

3P – 3DPoly: Draw a 3-dimensional spatial PLine.

A – ARC: Draw an arc.

AA – ARea: Calculate the area and circumference.

AL – ALIGN: Move, rotate, scale.

AR – ARray: Copy objects into sequences in 2D.

ATT – ATTDef: Property definition

ATE – ATTEdit: Edit the Block property.

B – BLock: Create Block.

BO – Boundary: Create closed polyline.

BR – Break: Trim a part of the line between the two selected points.

C – Circle: Draw a circle.

CH – Properties: Edit the properties of the object.

CHA – ChaMfer: Chamfer the edges.

CO – cp Copy: Copy object.

D – Dimstyle: Styling the size.

DAL – DIMAligned: Record size skewers.

DAN – DIMAngular: Record the size of the angle.

DBA – DIMBaseline: Record dimensions in parallel.

DCO – DIMContinue: Serial size recording.

DDI – DIMDiameter: Record size diameter.

DED – DIMEDit: Edit the size.

DI – Dist: Measure distance and angle between 2 points.

DIV – Divide: Divide the object into equal parts.

DLI – DIMLinear: Record size vertically or horizontally.

film all cad in hop lenh tat in autocad

DO – Donut: Draw a donut.

DOR – Dimordinate: Coordinate points.

DRA – DIMRadiu: Record the size of the radius.

DT – Dtext: Write down the text.

E – Erase: Delete object.

ED – DDEdit: Size adjustment.

EL – Ellipse: Draw an ellipse.

EX – Extend: Stretched object.

EXit – Quit: Exit the program.

EXT – Extrude: Create blocks from 2D shapes.

F – Fillet: Create a corner, rounded corners.

FI – Filter: Select the object by attribute.

H – BHatch: Drawing section.

-H – -Hatch: Drawing section.

HE – Hatchedit: Correction of sections.

HI – Hide: Recreate 3D models with hidden lines.

I – Insert: Insert block.

-I – – Insert: Edit the inserted block.

IN – Intersect: Create the intersection between 2 objects.

L – Line: Draw a straight line.

LA – Layer: Create classes and properties.

-LA – – Layer: Adjust layer properties.

LE – Leader: Create annotation paths.

LEN – Lengthen: Extend / shorten the object by a given length.

LW – LWeight: Declare or change the line thickness.

LO – Layout: Create Layout.

LT – Linetype: Displays the dialog box for creating and defining road types.

LTS – LTSCale: Set ratio of contours.

M – Move: Move the selected object.

MA – Matchprop: Copy properties from one object to one or more other objects.

MI – Mirror: Get object through 1 axis.

ML – MLine: Create parallel lines.

MO – Properties: Edit the properties.

MS – MSpace: Switch from paper space to model space.

MT – MText: Create a paragraph of text.

MV – MView: Create dynamic windows.

O – Offset: Copy in parallel.

P – Pan: Move the whole drawing.

-P – – Pan: Move the whole drawing from point 1 to point 2

PE – PEdit: Edit the polyline.

PL – PLine: Multi-line drawing.

PO – Point: Draw points.

POL – Polygon: Drawing polygons are closed.

PS – PSpace: Switch from model space to paper space.

R – Redraw: Refresh the screen.

REC – Rectangle: Draw a rectangle.

REG – Region: Create domain.

REV – Revolve: Create a rotating 3D cube.

RO – Rotate: Rotate selected objects around 1 point.

RR – Render: Display materials, trees, scenes, lights … of the object.

S – Stretch: Stretch, shorten the set of objects.

SC – Scale: Zoom in, zoom out proportionally.

SHA – Shade: Shadows 3D objects.

SL – Slice: Cut 3D blocks.

SO – Solid: Create polylines that can be filled.

SPL – SPLine: Draw any curve.

SPE – SPLinedit: Edit spline.

ST – Style: Create types of text recording.

SU – Subtract: Block subtraction.

T – MText: Create a paragraph of text.

TH – Thickness: Create thickness for object.

TOR – Torus: Draw torus.

TR – Trim: Cropping the object.

UN – Units: Locate the drawing.

UNI – Union: Addition of blocks.

VP – DDVPoint: Set the direction of 3D viewing.

WE – Wedge: Draw wedges and wedges.

X – Explode: Decay the object.

XR – XRef: Foreign reference to drawing files.

Z – Zoom: Zoom in, zoom out.

The above is a summary of the shortcuts as well as shortcuts in AutoCAD for beginners as well as those who are proficient, remember and gradually use the above keys, shortcuts because it is necessary for friend.

Also for those who encounter Net Framework error when installing AutoCAD, you can also refer to the article fix Net Framework error when installing AutoCAD to fix and install normally.

.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *