Canon 2900 printer jammed print job


In case the Canon 2900 printer is stuck with a job due to printing too many jobs or because of a certain reason why the printer cannot execute that command, how do you handle it now. For those who are using the Canon LBP 2900 model do not miss this.


Canon 2900 printer jammed print job In other words, the printer error receives the command but does not print. Why not print when the paper is full of the tray? If you notice the printer printer’s error but usually does not print it, there is a yellow light on each printer and it is likely that it has stuck with the command. Canon LBP 2900 print status is very frequent in the office environment when dozens of people are connected to a printer and issued many orders in a short time.

How to fix Canon 2900 printer error stuck print job

As mentioned above, the Canon 2900 printer is stuck on the job because there are too many print jobs at a time, and to solve this situation, you must delete those commands by restarting the server running the printer on. the server itself (which owns the printer and plugs in directly) so that all commands from other machines or the server itself are started. There are 2 ways to do that and we will do the following.

1. Fix Canon 2900 printer error with print job stuck through Run command box

Step 1: If this way you need to press Windows key + R key combination to open the Run command box, here you go enter command services.msc then press OK, got it to access the Servies tool.

Canon 2900 printer connected in 2

Step 2: Here you scroll down to find the section named Print Spooler (or Spooler), this is the process that is related to our printer.

Canon 2900 printer connected in 3

Step 3: Right click Print Spooler and here you choose Restart to restart this process.

Canon 2900 printer connected in 4

The restart process will take place very quickly, after the restart is complete, you can print a test to know whether the fix of Canon 2900 printer error is stuck or not immediately. Manipulation Restart Print Spooler This is like restarting a computer, all the commands will be reset to the beginning.

Canon 2900 printer connected in 5

2. Fix Canon 2900 printer error with print job stuck on Task Manager

Step 1: Follow this procedure to fix the Canon 2900 printer error that you just have a print job jam Right click the taskbar and choose Task Manager.

Canon 2900 printer connected in 6

Step 2: Next you click on the table Services and find the process called Spooler similar to Print Spooler in way 1.

Canon 2900 printer connected in 7

Step 3: Then you click Restart To reboot, the note is Wait about 10 seconds then check if the Canon 2900 printer error has stuck because the job has run out because the Task Manager operation will not display the running process as on Services.

Canon 2900 printer connected in 8

The above are two ways to help you quickly fix the Canon 2900 printer stuck in the print job, as you have seen, both ways help you access Print Spooler or Spooler to restart the process. However, through this article, we also provide you with more than 1 way to solve a problem and these operations have quick time to do it, do not differ too much, so how can you apply that way?

https://thuthuat.taimienphi.vn/may-in-canon-2900-bi-ket-lenh-in-40157n.aspx
It is about the printer receive command but not print on Canon LBP 2900, what about if the printer does not receive print job on computer? What causes and how to fix it. Refer to repair instructions The printer error does not accept the print job on the computer and follow our instructions.

.

Add a Comment

Your email address will not be published. Required fields are marked *