Common Windows 10 Fall Creators Update installation errors (Part 2)


To build an operating system without any errors is not easy and during the installation process or after the installation is completed, you may face problems, errors are inevitable. out of. In the following article, Taimienphi.vn will review and provide you with a list of common Windows 10 Fall Creators Update installation errors (Part 2).


There are many culprits that cause the installation error, failure to upgrade Windows 10 Fall Creators Update, possibly due to hardware or driver compatibility issues of connected peripherals on the computer, …. Serial synthesis Windows 10 Fall Creators Update Part 1 installation error, in this article, Taimienphi.vn will add the common Windows 10 Fall Creators Update installation errors (Part 2) so readers can understand the common errors and fixes in the process of installing a new operating system. hey.

Common Windows 10 Fall Creators Update installation errors (Part 2)

Fix error 0x80070490 – 0x20003 in the process of upgrading Windows 10 Fall Creators Update with the Media Creation Tool

Problem

Some users have reported that during the Windows 10 Fall Creators Update upgrade with the Media Creation Tool but failed, on the screen they received the error message 0x80070490 – 0x20003.

Solution to fix errors

While the best way to upgrade to the Windows 10 Fall Creators Update is to wait until the update is available on your device, but if you want to install and experience the Windows 10 Fall Creators Update, here are some solutions. Solutions you can apply to fix this error:

– Use the Disk Cleanup tool to clean up temporary files on the system, including Temporary Windows installation files and Windows Setup temporary files.

– Disconnect all connected peripherals on your computer, including external storage, printers, cameras and phones, etc. During the Windows 10 Fall Creators Update upgrade, you need only an Internet connection, a monitor, mouse and keyboard.

After disconnecting all peripherals, use the System File Checker (SFC) command built into Windows to repair the system before upgrading the Windows 10 Fall Creators Update.

Alternatively, you can use the Deployment Image Servicing and Management (DISM) command, a new command-line tool built into the operating system, to fix errors on the system before upgrading the Windows 10 Fall Creators Update.

Next try using the Media Creation Tool again, but this time try to create a USB Bootable Windows 10 Fall Creators Update and upgrade again.

If the Windows 10 Fall Creators Update upgrade fails, use the Disk Cleanup tool to clean up all temporary files on the system and use the Update Assistant to install the Windows 10 Fall Creators Update again.

In case if all of the above solutions fail, create a backup of your entire system and important data files, then perform a clean installation to install Windows 10 with the Fall Creators Update.

Fixed an issue where the emoji sheet would disappear after upgrading the Windows 10 Fall Creators Update

Problem

Starting with the Windows 10 Fall Creators Update which supports additional emoji panels, users can use keyboard shortcuts Windows key + “.” or Windows key + “;”. However, many users have reported that emoji tables were not found after upgrading the Windows 10 Fall Creators Update.

Solution to fix errors

The key issue is that emoji support is currently available and only available to users based in the United States. However, if you want to use emoji, the only way to activate the keyboard language is EN – US.

Step 1: Open Settings.

Step 2: Click Time & Language.

Step 3: Click here Region & language.

Step 4: Section Languages, choose your language and click Options.

Step 5: Section Keyboards, click the button Add a keyboard.

Step 6: Choose US keyboard.

From now on when you use the support shortcut to open the emoji panel, it will show on the screen.

Fix virtual keyboard (touch keyboard) after installing Windows 10 Fall Creators Update

Problem

Although the Windows 10 Fall Creators Update has been successfully installed, every time you open your computer, the on-screen keyboard is displayed on the screen, after the user logs in.

Solution to fix errors

Some Reddit users have reported that stopping the Touch Keyboard and Handwriting Panel process from running in the Task Manager can fix this error. But this is only a temporary solution, the error still reappears if you open the virtual keyboard.

Step 1: Open Task Manager (using the keystrokes Ctrl + Shift + Esc).

Step 2: On the Task Manager window, at Process tab, find and right click on the process Touch Keyboard and Handwriting Panel, choose End Task.

Windows 10 Fall Creators Update Installer Part 2 2

Alternatively, disable the touch keyboard service that starts with Windows 10.

Step 1: Open Start

Step 2: Import Service in the Search box, then on the search results list, click to open the Services window.

Step 3: On the Services window, find and double-click Touch Keyboard and Handwriting Panel Service.

Step 4: In General tab, set item Startup type was Disabled.

Windows 10 Fall Creators Update Installer Part 2 3

Step 5: Section Service status, click the button Stop.

Step 6: Click Apply.

Step 7: Click OK, got it.

Finally restart your computer and the virtual keyboard no longer automatically starts.

Once this fix is ​​available, you can revert your changes by following the same steps, but go to step 4 Startup type was Automatic.

Fix the black screen error during the installation of Windows 10 Fall Creators Update

Problem

During the upgrade or installation of the Windows 10 Fall Creators Update, you may face black screen errors, which affect the installation process.

Usually, if a black screen error appears on Windows 10, it may be because during the feature update installation, the previous quality update (quality update) was not installed properly or This could be due to a faulty graphics card driver or your device hardware.

Solution to fix errors

If during the installation or upgrade of the Windows 10 Fall Creators Update, you encounter a black screen error, try disconnecting all peripheral devices, booting your computer into Safe Mode to fix the error, or Reinstall the video driver, create a new user account, and so on.

In case if everything does not work, follow the steps below to remove the update and roll back to an earlier version of Windows 10:

Step 1: Open Settings.

Step 2: Click Update & Security.

Step 3: Click here Recovery.

Step 4: At section Go back to a previous version of Windows 10, click the button Get started.

Step 5: Select the reason you want to downgrade to the previous version.

Step 6: Click here Next.

Step 7: Click here No thanks.

Step 8: Click Next.

Step 9: Choose next once again.

Step 10: Click here Go back to earlier build to start the process.

Fix Start Menu “ms-resource”

Problem

After upgrading Windows 10 Fall Creators Update, if you pay close attention, you will see on the Start Menu, more specifically in the list of All apps (all applications) displays “ms-resouce:” with the same name application.

Windows 10 Fall Creators Update Installers Part 2 4

There are several possible causes for this error, and the error indicates that you will need to reinstall the Windows Store applications built into your device.

Solution to fix errors

Try using PowerShell to fix the error.

Step 1: Open Start

Step 2: Import PowerShell In the Search box, then on the search results list, right-click and select PowerShell Run as administrator.

Step 3: Enter each of the following commands into the PowerShell window and press Enter to reregister the missing Windows 10 built-in applications:

reg delete “HKCU Software Microsoft Windows NT CurrentVersion TileDataModel Migration TileStore” / va / f

get-appxpackage -packageType bundle |% {add-appxpackage -register -disabledevelopmentmode ($ _. installlocation + ” appxmetadata appxbundlemanifest.xml”)}

$ bundlefamilies = (get-appxpackage -packagetype Bundle) .packagefamilyname

get-appxpackage -packagetype main |? {-not ($ bundlefamilies -contains $ _. packagefamilyname)} |% {add-appxpackage -register -disabledevelopmentmode ($ _. installlocation + ” appxmanifest.xml”)}

After the above commands are executed, reboot your computer and the error “ms-resourceappDisplayName” is no longer displayed on the Start Menu.

You can also use your local account to fix the Start Menu “ms-resource” error after upgrading the Windows 10 Fall Creators Update.

Fix the Start Menu error on Windows 10 Fall Creators Update

Problem

After upgrading the Windows 10 Fall Creators Update, some users responded to the Start Menu problems and errors quite a lot. Some users responded to the app icon and Live Tiles missing, but the app was still installed and working properly. Also some other users responded that the Start Menu did not work after upgrading the Windows 10 Fall Creators Update.

Microsoft has also officially acknowledged the error of installing the Windows 10 Fall Creators Update and provides some troubleshooting solutions for users.

Solution to fix errors

If you find a missing application or Start Menu is not working, here are some ways to troubleshoot the Start Menu on the Windows 10 Fall Creators Update.

– Solution 1:

If you notice that some built-in apps (such as Mail, Computer, Feedback Hub, etc.) are missing, you can try reinstalling to re-register the application on the Start Menu.

To fix this problem using PowerShell.

Step 1: Open Start

Step 2: Import PowerShell In the Search box, then on the search results list, right-click and select PowerShell Run as administrator.

Step 3: Enter each of the following commands into the PowerShell window and press Enter to reregister the missing Windows 10 built-in applications:

reg delete “HKCU Software Microsoft Windows NT CurrentVersion TileDataModel Migration TileStore” / va / f

get-appxpackage -packageType bundle |% {add-appxpackage -register -disabledevelopmentmode ($ _. installlocation + ” appxmetadata appxbundlemanifest.xml”)}

$ bundlefamilies = (get-appxpackage -packagetype Bundle) .packagefamilyname

get-appxpackage -packagetype main |? {-not ($ bundlefamilies -contains $ _. packagefamilyname)} |% {add-appxpackage -register -disabledevelopmentmode ($ _. installlocation + ” appxmanifest.xml”)}

If they are apps that you download and install on the Store, follow the steps below to reinstall the apps:

Step 1: Open Settings.

Step 2: Click Apps.

Step 3: Click here Apps & features.

Step 4: Select the application, then click the button Uninstall.

Step 5: Choose Uninstall Again to confirm.

Finally, open Store, search for the application, and then click Install to install the application, and the applications you install will appear on the Start Menu.

– Solution 2:

If the Start Menu is not working properly, try resetting the Start Menu to its original default state. Note that if you apply this method to fix errors, you will have to reconfigure the Start Menu manually.

– Solution 3:

If the above two solutions are not available, the Windows 10 Fall Creators Update installation error still appears, try using a Local account to see if the error is due to your account. If the culprit is your account, simply move your settings and data files to the new account, then delete the corrupted account.

– Solution 4:

Assuming that the above solutions apply but the error still persists, try resetting your computer but remember to store your files, settings and applications.

Important note:

After applying this solution, you cannot downgrade to a previous version of Windows 10. If you want to downgrade, go back to the previous version, you can apply solution 5 below.

Step 1: Open Windows Defender Security Center.

Step 2: Choose Device performance & health.

Step 3: Section Fresh start, click the link Additional info.

Windows 10 Fall Creators Update Installer Part 2 5

Step 4: Click the button Get Start.

Finally, follow the on-screen instructions to reinstall Windows 10.

– Solution 5:

Downgrade, restore to the previous Windows 10 version state and wait until Microsoft provides bug fixes.

Step 1: Open Settings.

Step 2: Click Update & Security.

Step 3: Click here Recovery.

Step 4: At section Go back to a previous version of Windows 10, click the button Get started.

Step 5: Select the reason you want to downgrade to the previous version.

Step 6: Click here Next.

Step 7: Click here No thanks.

Step 8: Click Next.

Step 9: Choose next once again.

Step 10: Click here Go back to earlier build to start the process.

Fix network connection errors after installation, upgrade Windows 10 Fall Creators Update

Problem

After successfully upgrading the Windows 10 Fall Creators Update, it is possible that on your Windows 10 computer there is no Internet connection or a very slow Wifi or wired connection.

Solution to fix errors

There are many causes of this error. This could be due to an inadequate upgrade of the network settings, or it may be due to the network driver, and a number of other reasons.

The best way to fix this problem is to use the Network Troubleshooter tool and Windows 10 will automatically fix the problem.

While troubleshooting network problems can sometimes be overwhelming, the best way to fix this problem is to use a network troubleshooting tool and have Windows 10 automatically fix the problem.

Step 1: Open Settings.

Step 2: Click here Network & security.

Step 3: Click here Status.

Step 4: Section Network status, click the button Troubleshoot.

Windows 10 Fall Creators Update Installers Part 2 6

Step 5: Follow the on-screen instructions to fix network connection errors on Windows 10 Fall Creators Update.

Install Windows 10 Fall Creators Update properly

Installing and upgrading a new version of Windows 10 is a simple process, only creating a new operating system running on millions of new devices is complicated. However, during the installation process, upgrading users cannot avoid errors and problems.

To minimize the risk of errors during the Windows 10 Fall Creators Update installation, just follow the steps below:

– Create backup:

Windows 10 has a built-in mechanism to automatically roll back any changes during the installation process, in case something goes wrong. However, this feature does not always work, which is why you should create a system backup before installing. Windows 10 Fall Creators Update.

Windows 10 Fall Creators Update Installers Part 2 7

Refer to the steps performed in the tutorial article back up the entire Windows 10 of Taimienphi.vn

If during the Windows 10 Fall Creators Update installation, you can use the backup to revert the changes.

– Uninstall the application:

The failure to install and upgrade the Windows 10 Fall Creators Update may be due to an application compatibility error. The best way to prevent this from happening is to remove the application that you think might be the cause of the error, such as programs, antivirus software, or traditional applications before starting the upgrade process. grant.

Follow the steps below to uninstall the application that caused the Windows 10 Fall Creators Update upgrade error to fail:

Step 1: Open Settings.

Step 2: Click Apps.

Step 3: Click here Apps & features.

Step 4: Select the application you want to uninstall and then select Uninstall.

Windows 10 Fall Creators Update Installers Part 2 8

Follow the instructions on the screen to uninstall the application. If multiple applications are the cause of the error, follow the same steps to uninstall the application.

If you are using Windows Defender Antivirus, follow the steps below to disable the program:

Step 1: Open Windows Defender Security Center.

Step 2: Click here Virus & threat protection.

Step 3: Select the link Virus & threat protection.

Windows 10 fall creators update settings 2

Step 4: Toggle option Real-time protection to OFF.

Windows 10 Fall Creators Update Installers Part 2 10

After upgrading the Windows 10 Fall Creators Update, Windows Defender Antivirus will automatically activate or you can download and install other antivirus programs.

In addition, the Windows Firewall (firewall) can also cause the installation of Windows 10 Fall Creators Update to fail. Follow the steps below to temporarily disable Windows Firewall and install the Windows 10 Fall Creators Update:

Step 1: Open Windows Defender Security Center.

Step 2: Click Firewall & network protection.

Windows 10 Fall Creators Update Installers Part 2 11

Step 3: Select the link Private (discoverable) network.

Step 4: State transitions Windows Firewall to OFF.

Windows 10 Fall Creators Update Installer Part 2 12

Step 5: Click on the link Public (non-discoverable) network.

Step 6: State transitions Windows Firewall to OFF.

Windows 10 fall creators update settings 2

– Stop downloading updates:

If you are using Windows 10 Pro and are using Windows Update to download the Windows 10 Fall Creators Update, try checking to see if your computer is blocking the download of the Fall Creators Update. Follow the steps below:

Step 1: Open Settings.

Step 2: Click here Update & security.

Step 3: Click on the link Advanced options.

Windows 10 Fall Creators Update Installers Part 2 14

Step 4: Section Choose when updates are installed, make sure the settings are configured Current Branch and the delay option is set to 0 days.

Windows 10 Fall Creators Update Installers Part 2 15

Also make sure you have the option turned off Pause Updates.

If using a limited Internet connection plan, make sure your network data plan has enough data. Alternatively, use a Wi-Fi connection or an Ethernet wired network.

Step 1: Open Settings.

Step 2: Choose Network & Security.

Step 3: Choose WIFI or Ethernet.

Windows 10 Fall Creators Update Installers Part 2 16

Step 4: Click on the network connection you are using.

Step 5: Optional state transitions Set as metered connection to OFF.

Windows 10 fall creators update settings 2

– Disconnect peripheral devices:

Sometimes the culprit causing the failure of the Windows 10 Fall Creators Update to fail is due to hardware or driver compatibility issues of connected peripherals on the computer.

Before installing the Windows 10 Fall Creators Update (version 1709), disconnect all unnecessary peripherals, such as removable storage devices such as USB flash drivers and hard drives, SD cards, printers, scanners and Bluetooth devices.

All you need to upgrade to the Windows 10 Fall Creators Update is the Internet connection, monitor, keyboard and mouse. After the successful Windows 10 Fall Creators Update, you can reconnect the peripherals.

– Storage of special settings:

In the past, many users reflected the loss of all settings after upgrading to a new version of Windows 10. If you’re using a special configuration on your device, store your settings in case you need to reapply the same configuration.

Often special settings need to be stored such as default applications and security settings, tweak the Registry and policies configured using the Local Group Policy Editor.

– Perform a clean installation:

If you can’t upgrade to the latest version, you can still perform a clean install to install the Windows 10 Fall Creators Update.

The process of performing a clean installation includes: cleaning up the hard drive – the Windows installation drive, erasing the current Windows installation, settings, applications and personal data, then reinstalling the Windows 10 Fall Creators Update.

To do this, you’ll need to download the Media Creation Tool, then create a Bootable USB drive to use to install the Windows 10 Fall Creators Update.

Although on every new version of Windows 10, Microsoft will improve and overcome the shortcomings on previous versions, but it should be noted that building an operating system without any errors is not a bad thing. Easy and during the installation process or after the installation is completed, you will probably face problems, errors are inevitable.

If you are planning to install Windows 10 Fall Creators Update, it is best to do it as soon as possible. And remember that the best way to upgrade the Windows 10 Fall Creators Update is to wait until the update is available through Windows Update, which is a way to minimize the risk of errors and errors.

https://thuthuat.taimienphi.vn/cac-loi-cai-dat-windows-10-fall-creators-update-thuong-gap-phan-2-28955n.aspx
Above Taimienphi.vn has just introduced you to the common Windows 10 Fall Creators Update installation errors (Part 2). Have you installed or upgraded the Windows 10 Fall Creators Update? Share your opinions for Taimienphi.vn offline.

.

Add a Comment

Your email address will not be published. Required fields are marked *