If you are facing the problem of computer crashes, freezes when just starting, read along with the following article to know how to fix computer crashes when opening, how to boot.
There are many causes of computer crashes when opening and starting up, possibly due to hardware or software. In the article below, Betdownload.com will guide you some ways fix crashes computer When turning on the machine, start up.
Cause of error that causes the computer to hang when opening, booting
As mentioned above, there are many causes of computer crashes when opening, booting, possibly due to faulty hardware or software components, affecting the entire system.
Specifically, the cause of the error may be due to the computer overheating, hardware failure, system error or driver error, …. The next section below Taimienphi.vn will introduce you some ways to fix this error.
Fix computer crashes when opening, booting
Readers can refer to a number of ways to fix computer crashes when opening, booting to fix errors.
Method 1: Restart the computer
Rebooting the system can help the system work correctly in the process. Try restarting your computer and check to see if your computer still crashes on startup.
– Case 1: If possible use the mouse or the boot keyboard.
Restart the computer with the mouse:
Step 1: Click here Start button at the bottom left corner of the screen.
Step 2: Right-click power button, click Shut Down.
Step 3: After the computer has completely shut down, press the Power button again to turn on the computer and check if the error is still there or not.
Restart the computer using the keyboard:
Step 1: Press Windows + D to access the desktop.
Step 2: Next press the key simultaneously Alt + F4.
Step 3: Click Enter to turn off your computer.
Step 4: Press the Power button again to reopen the computer and check if the error persists.
– Case 2: If unable to turn off the computer in the normal way.
If the computer cannot be turned off in the usual way, press and hold the Power button to turn off the computer, then press the Power button again to turn the computer back on and check if the error persists.
Method 2: Make sure the CPU works properly
Another cause of computer crashes when opening the computer, booting may be due to device overheating, resulting in improper CPU operation and error.
To fix the error:
– Clean the computer case: Dirt on the computer or laptop case can cause the cooling fan to not ventilate, resulting in overheating of the device battery and causing improper system operation.
The solution is to clean the computer and laptop case to make sure the exhaust fan works properly.
If you do not know how to clean the computer properly, readers can refer to the tutorial article clean the computer The best way on Taimienphi.vn to know how to do it.
– Ensure the location of the computer in a well-ventilated place: Keep your computer and laptop in a well-ventilated area, avoid placing it close to the wall or putting your laptop on blankets and clothes.
– Make sure the cooling fan is running: Finally, it is not sure what causes the computer to be hot, try to check if the cooling fan is running or not.
Method 3: Boot the computer into Safe Mode
If you can’t boot your computer normally, try booting your computer into Safe Mode by pressing the F8 key, or if you can boot to the login screen, you can access Safe Mode on login screen.
Step 1: Press and hold Shift key on the keyboard.
Step 2: While pressing and holding Shift key, on the login screen, click power button at the bottom right corner, then click Restart. Now Windows will display the Windows RE (Recovery environment) window.
Step 3: On the Windows RE window (Recovery environment), click Troubleshoot.
Step 4: On the Troubleshoot window, click Advanced options.
Step 5: Next click Startup Settings.
Step 6: Click here Restart. The computer will reboot and on the window display there are many different boot options.
Step 7: Click 4 on the keyboard to access Safe Mode without a network connection. If you need to search online, need a network connection, click key 5 to access Safe Mode with Networking.
If you cannot access Safe Mode in the above way, follow the steps below:
Step 1: Make sure the computer is completely turned off.
Step 2: Click power button To turn on the computer again, then press the Power button until the computer automatically shuts down (about 5 seconds). Repeat these steps 2 times until you see the Preparing Automatic Repair window shown on the screen as below screenshot shown:
Note: This step opens the Preparing Automatic Repair window. If Windows doesn’t boot properly, this window will show up to fix Windows errors. If this window appears the first time you open the computer, you can skip this step.
Then wait a few minutes for Windows to diagnose your computer.
Step 3: Click here Advanced options to open the Windows RE (Recovery environment) window.
Step 4: On the Windows RE window (Recovery environment), click Troubleshoot.
Step 5: On the Troubleshoot window, click Advanced options.
Step 6: Click here Startup Settings to continue.
Step 7: Click Restart. The computer will reboot and on the window display there are many different boot options.
Step 8: Click 4 on the keyboard to access Safe Mode without a network connection. If you need to search online, need a network connection, click key 5 to access Safe Mode with Networking.
After booting the computer into Safe Mode, follow the next steps to fix the computer crashes when opening, booting.
Method 4: Disable Fast Startup
Step 1: Import power option Go to the Search box on the Start Menu, then on the search results list, click Power & sleep settings.
Step 2: Click here Additional power settings.
Step 3: Choose Choose what the power button does.
Step 4: Next choose Change settings that are currently unavailable.
Step 5: Unchecked Turn on fast startup (recommended), Then click Save changes.
Step 6: Finally restart the Windows computer into normal mode and check if the error remains or not.
Method 5: Update device drivers
Another cause of computer crashes when opening and booting may be due to faulty or outdated drivers. The solution is to update to the latest device driver version and check if the error is still there.
Method 6: Remove all peripherals connected to the computer
If there are devices such as a USB mouse or other peripherals, a USB drive is connected on the computer. Try removing all of these devices, then restart your computer and check if the error persists.
Method 7: Disable AppXSvc
Step 1: Press Windows + R to open the Run command window.
Step 2: Import regedit Click on it and press Enter Or click OK, got it
Click here Yes on the User Account Control window.
Step 3: Next access HKEY_LOCAL_MACHINE => SYSTEM => ControlSet001 => Services.
Step 4: Click here AppXSvc, then double click Start
Step 5: Set the value in the Value Data frame to 4 then click OK, got it
Step 6: Finally restart your computer and see if the error persists.
The article above Taimienphi.vn has just taught you how to fix the computer hangs when opening, booting. In addition, readers can refer to some other articles already on Taimienphi.vn to learn how to fix slow and jerky computer errors.