Fix Partner did not connect to router on TeamViewer


TeamViewer is one of the best remote control and connection software available today. If you are using TeamViewer and are experiencing Partner did not connect to router errors, read along to the following article of Taimienphi.vn to learn how to fix errors. Partner did not connect to router, No connection to partner Error Code WaitforConnectFailed on TeamViewer.


There are many causes of Partner did not connect to the router on TeamViewer, of which the main reason is that the user’s computer does not have an Internet connection. However, sometimes the error can occur even when both devices are connected to the network. In this case, the cause may be due to corrupted settings, compatibility errors between TeamViewer versions installed on 2 computers, etc.

The following article will show you some ways to fix Partner did not connect to router on TeamViewer.

If you have not installed TeamViewer, you can visit here to download the software and install it.

Fix Partner did not connect to router on TeamViewer

Here Taimienphi.vn will guide you some ways to fix Partner did not connect to router on TeamViewer. But before you get started, make sure you have the latest and most stable versions of Windows and TeamViewer.

Method 1: Restart the router

The first and simplest solution to fix Partner did not connect to router on TeamViewer is to restart the network router and check if the connection error still occurs.

Method 2: Allow full TeamViewer access

Open TeamViewer, then click Extras on the Menu bar. Next click Options from the navigation panel in the left pane, then select Advanced.

In the right pane, find and click the button Show advanced options

In section Advanced settings for connection to this computer, item Access Control You choose the option Full Access from the menu.

fix partner did not connect to router on teamviewer 2

Finally click OK, got it and check if Partner did not connect to the router.

Method 3: Delete DNS configuration

First open the Command Prompt window under Admin, then enter each of the following commands and press Enter To clear DNS cache and fix the Partner did not connect to router error:

ipconfig / release

ipconfig / renew

ipconfig / flushdns

repair partner did not connect to router on teamviewer 3

Note: If you do not know how to open Command Prompt under Admin on Windows, readers can refer to the article Running CMD with Administrator rights on Windows 7, 8, 8.1, 10 on Taimienphi.vn to know how to do it.

After executing the commands, close the Command Prompt window and check if the TeamViewer error is still present, if the Teamviewer error is still there, we will continue the other way.

In addition, if the above methods are not available, you can try solutions like reset Winsock and reset TCP / IP to see if it helps fix the error.

The article above Taimienphi.vn has shown you 3 ways to fix Partner did not connect to router on TeamViewer. In addition, if you have any questions or questions, you can leave your comments in the comment section below the article, Taimienphi.vn will answer your questions as soon as possible. be.

https://thuthuat.taimienphi.vn/sua-loi-partner-did-not-connect-to-router-tren-teamviewer-45754n.aspx
Besides the above error, the black screen Teamviewer error is also a common error that many people often encounter but still do not know how to handle, Taimienphi will have a specific article on fixing the TeamViewer black screen error in detail and make sure sure effective.

.

Add a Comment

Your email address will not be published. Required fields are marked *