Fix USB device not recognized error


On a clear day when you plug in a mouse, the USB device on the computer and the display shows the USB device not recognized error. The following article will guide you how to fix USB device not recognized mouse.


USB device not recognized error not receiving mouse is also a fairly common error on Windows computers, readers can refer to some ways to fix USB device not recognized mouse in the following article of Taimienphi.vn.

Table of Contents:
Method 1. Restart your computer.
Method 2. Try plugging the mouse into another computer.
Method 3. Remove all other peripherals.
Method 4. Change Power Management settings for USB Root Hub.
Method 5. Update the USB port driver.
Method 6. Change Power Options settings.
Method 7. Change USB selective suspend settings.

Fix USB device not recognized error

Method 1. Restart your computer

If the USB device not recognized error appears on the screen, the computer does not recognize the mouse, try removing the USB device and the mouse from the computer and restarting the device. After the computer restarts, try plugging in the mouse and USB device again to see if the error still occurs.

Method 2. Try plugging the mouse into another computer

The next way is to try plugging the USB device and mouse into another computer and checking. If it still doesn’t work, it’s probably because your USB device or mouse is broken, it’s time to change your mouse.

Method 3. Remove all other peripherals

Connecting too many USB devices at the same time on the same computer can cause conflicts, causing some devices to stop working or not work properly.

To avoid conflicts between devices, disconnect all USB devices and other peripherals that are connected on your computer and check if the USB device not recognized error does not recognize the mouse.

Method 4. Change Power Management settings for USB Root Hub

Follow the steps below to change the Power Management settings for USB Root Hub and fix the USB device not recognized mouse error:

Step 1: Press Windows + R To open the Run window, and enter devmgmt.msc on that and press Enter.

Fixing USB device not recognized without flashing 2

Step 2: On the next screen on the screen, click the arrow icon to expand the item Universal Serial Bus controllers. Find and right-click USB Root Hub, choose Properties.

Fixing USB device not recognized without flashing 3

Step 3: On the USB Root Hub Properties window, click Power Management tab and un-tick Allow the computer to turn off this device to save power =>OK, got it

Fix unrecognized usb device not recognized 4

If you have multiple USB Root Hubs, follow the same steps, making sure that you click OK after you are done with each USB Root Hubs.

The next step is to try plugging the mouse and USB into your computer to see if the error persists. If the error persists, follow the same steps and check the box Allow the computer to turn off this device to save power.

Method 5: Update USB port driver

If all of the above methods apply but it’s still not available, the error still exists, most likely due to the faulty USB driver. In this case, the solution is to update the USB port driver to fix the error.

To update the USB port driver manually, go to the manufacturer’s homepage, find and download the latest driver version and install it. It is required that you choose the correct driver version that is compatible with the version of Windows you are using.

Method 6: Change Power Options settings

Step 1: Open Control Panel =>Hardware and Sound =>Power Options.

Fix USB device not recognized without flashing 5

Step 2: Next click Choose what the power button does.

Fix unrecognized usb device not recognized 6

Step 3: Click here Change settings that are currently unavailable.

Fixing USB device not recognized without flashing 7

Step 4: Uncheck the item Turn on fast startup, then click Save changes.

Fix USB device not recognized without flashing 8

Step 5: Restart your computer and try connecting your mouse and USB device again to see if the error persists.

Method 7: Change USB selective suspend settings

Step 1: Access Control Panel =>Power Options.

Fixing USB device not recognized without flashing 9

Step 2: Click here Change plan settings.

Fix USB device not recognized without flashing 10

Step 3: Click here Change advanced power settings.

Fix USB device not recognized without flashing 11

Step 4: Expand the item USB settings and USB selective suspend settings.

Fix unrecognized usb device not recognized 12

Step 5: Section On battery and Plugged in setting is Disable.

Fix unrecognized usb device not recognized 13

Finally click Apply =>OK, got it

https://thuthuat.taimienphi.vn/sua-loi-usb-device-not-recognized-khong-nhan-chuot-38232n.aspx
The article on Taimienphi.vn has just taught you some ways to fix USB device not recognized mouse error, there are many other errors that lead to the computer mouse crash, jump around unusable, if you have a fix computer mouse error is broken, readers please leave your comments in the comment section below the article, Taimienphi.vn will answer your questions as soon as possible.

.

Add a Comment

Your email address will not be published. Required fields are marked *