Wi-Fi signaling with TP-LINK is like setting up a WiFi for a new modem, but the device will work here via reception and playback, not using your wired network. . It is like a WiFi Repeater when your device receives and amplifies it and then emits it.
TP-LINK As a famous brand in Vietnam, its modems have lots of features and in today’s article we will explore how enable wifi with TP-LINK, turning your TP-LINK WiFi modem into an extremely simple WiFi Repeater. This way you can apply in situations where the network cord cannot reach.
Of course, if WiFi is streamed from the network, it will be better than installing WiFi broadcasting. However in some cases there is no we can apply the way WiFi settings Broadcast as Repeater.
Guide to enable wifi with TP-LINK
Step 1: First, go to TP-LINK’s address to get access to WiFi settings, usually 192.168.0.1.
Note: Separate the WiFi you use to activate the wifi signal with TP-LINK with your laptop.
Here you login password and account are admin / admin.
Step 2: After successfully login TP-LINK go to Network to check your network.
Step 3: In Finland You can adjust the IP differently than 192.168.0.1 such as 192.168.2.1 or 192.168.3.1 engraved if the original WiFi or WiFi you used to relay has used that IP address 192.168.0.1.
Step 4: Then on Wireless section > select Wireless settings and name that WiFi and save it.
Step 5: Continue to access the section Wireless Security, here you proceed to set a regular password with the security type WPA-PSK / WPA2-PSK okay, after finishing, remember to save.
Step 6: Back to section Wireless Settings, here you choose Enable WDS, this is the feature that allows us to enable wifi with TP-LINK.
Step 7: A parameter table below appears you click Search to search.
Step 8: Choose one SSID Which state is ON, maybe your home network won’t have as many options as in the picture and here you click Connect to connect.
Step 9: Then proceed to set a password and click Save, restart the modem to complete wifi activation with TP-LINK.
At this point, the Wi-Fi activation with our TP-LINK has been completed, you can take your mobile device or laptop to try the new WiFi has been received.
Above is the whole process enable wifi with TP-LINK, with the simple method above, you can enable wifi with TP-LINK, turn TP-LINK WiFi modem into WiFi Repeater in an area without network. For those who are using a TP-LINK modem but do not know where to change the password, where and how can refer here, how to Change Tplink password Detailed instructions by Taimienphi.vn
Normally we only get used to changing the wifi password on the computer, but we can also change the wifi password on the phone, details on how to change the wifi password on the phone has been introduced by Taimienphi, if necessary. mind you can watch.