Suddenly your Windows 10 cannot connect to the network or the network message is limited “limited access”, so how to fix the network error is limited on Windows 10. Put your Windows 10 status old and connected to the network.
There are many reasons why the computer can not connect to the network, or Network error restricted This is a good luck because Windows 10 has a lot of ways to help you fix it Internet connection error of Windows 10 And there are many choices and methods you can apply.
With the methods that Taimienphi.vn listed below, you can apply one by one until Fix no Windows 10 network error success. It is not necessary to apply all the ways because it can cause the loss of the computer’s network, your laptop just falls into the way of the repair that we offer.
Network error is limited on Windows 10, error no network Windows 10
Reboot the device.
How to fix a limited network error on Windows 10 or a non-Windows 10 network error is to restart the computer, you can restart the computer to re-see if the errors are fixed or not.
Sometimes your Modem is running for too long or for some other reason that causes the system in your device to be problematic, the best way is to unplug the power cord, turn off the Modem and let 5 to 10 minutes for IP automatically reset and then reopen to see if the limited network error on Windows 10 has been resolved.
Check the network cable
Try reviewing your network connection via cable in case there is no network on both computers, laptops and Modem to see if the light signal is on, it is difficult to cause also due to the network cable.
Thanks to Windows 10 discovered the error with Network Toubleshoot
Step 1: Open Start menu and click on the icon Settings .
Step 2: In Windows Settings continue to select section Network & Internet – this is a section that allows you to set up, create and fix network problems.
Step 3: In the tab Status click on Network Troubleshooter and follow the instructions to automatically check for errors.
After checking for errors, reboot your computer to complete the limited network error on Windows 10.
Fix network errors limited on Windows 10 with Powershell, Command Prompt
Step 1: You can choose usage options Command Prompt or Powershell optionally on your Power Menu displayed, Press key combination Windows + X to enter Power Menu Please.
Step 2: After you have opened it Command Prompt ( in the post is Powershell ), type the following command to free your IP “ipconfig / release”
Step 3: Next, type the command “ipconfig / renew” to get a new IP address from the system. Perhaps the error of not having your Windows 10 network is due to IP overlap, so this method works pretty well.
Turn off power saving features when using WiFi.
Step 1: Taimienphi.vn has mentioned a lot in previous articles, this is a way to help you fix limited network errors on Windows 10 very effectively. To do so, simply open the Power Menu (mentioned above) and select Device Manager.
Step 2: Then visit Network Adapter >Qualcomm Atheroes and click Properties .
Step 3 : In the Power Management section, uncheck Allow the computer to turn off this device to save power.
Reset all network settings
Step 1: Open Start menu and select the item settings .
Step 2: Access to the item Network & Internet to reset the network.
Step 3: In the tab Status Click Network reset .
Step 4: Click here Reset now to reset from the beginning.
With the methods that Taimienphi.vn just mentioned for you to fix limited network errors on Windows 10, hope you will find yourself a simple, most effective method and try to not have to use the finally, you have to reset all network settings. And regardless of any network or Windows 10 internet problems that you encounter but are not here, please leave a comment below the article, we will reply to the reader as soon as possible.