How to install the operating system for the Raspberry Pi


The following article will guide you how to install the operating system for Raspberry Pi Taimienphi.vn. In addition, readers can refer to some articles already on Taimienphi.vn to learn how to connect Raspberry Pi remotely using a Windows computer.


Raspberry Pi does not come with a pre-installed operating system. This means we can select and install many different operating systems on the Raspberry Pi’s SD memory card. In the following article, Betdownload.com will guide you how to install and run Windows, macOS or Linux operating system on Raspberry Pi.

1. Select the Raspberry Pi operating system

Because many operating systems are available to run on the Raspberry Pi, from the proposed Raspbian Stretch to Ubuntu MATE, through Kodi, RetroPie and many other projects, through a number of alternative Linux distributions, and not must be Linux.

You can choose any operating system to install on the Raspberry Pi, but be sure to download the ISO or IMG file of the operating system on your Windows computer to write to the Raspberry Pi SD memory card.

2. Burn the operating system to the SD card or USB drive

To install the operating system for Raspberry Pi, we will have to use Etcher. This is a tool for writing images to a USB drive or SD memory card. Etcher is available for both Windows, Linux and macOS.

Download Etcher to your device and install it here: Download Etcher

After installing and running Etcher, you will see 3 buttons.

All you need to do is click each button. Click the button Select Image, then browse to the OS’s ISO or IMG file. Next click Select Drive to select SD card. Etcher is smart enough to detect which SD card is connected or inserted on your computer.

Finally click Flash to start writing data. You do not need to format the SD card because Etcher will handle this.

Once done, click OK, got it to finish and exit Etcher. Remove the SD card and insert it into the powered Raspberry Pi. Connect the power cord and wait for the computer to boot the operating system.

If you feel like using Etcher to install complex operating systems, you can buy an SD card with Raspbian already installed.

3. Launch Raspbian for the first time

With Raspbian installed, you will have to log in using the following information:

– Username (username): pi
– Password: raspberry

For other operating systems, you should check your documentation for the default login credentials.

Note the password will not be displayed when you enter it, without the symbols Windows-style * Representing the letters, this icon is not displayed when you enter the password. This is a security feature on Linux to prevent other users from being able to guess your password.

After Raspbian has booted, change your password by running the command:

sudo raspi-config

Choose an option Change Password (change the password) and follow the instructions on the screen.

4. Install the operating system for the Raspberry Pi using NOOBS

An easier way to install popular Raspberry Pi distributions is to use NOOBS.

NOOBS stands for New Out Of Box Software, including Arch Linux, OpenELEC Kodi, RISC OS and many other Raspbian distributions.

how to operate the raspberry pi 2

NOOBS is available on raspberrypi.org and does not require writing to the SD card in the same way that Raspbian and other Raspberry Pi operating systems do.

Download NOOBS and install it here: Download Noobs

You will have to prepare formatted SD cards larger than 4GB. Note, offline and online NOOBS installers are available, with different sizes, in which to download small-sized installer requires Raspberry Pi to be connected to the Internet via Ethernet network.

In addition, a keyboard / or mouse and HDMI monitor must be prepared to access the operating system setup menu with NOOBS.

With the Raspberry Pi booted into the NOOBS interface, you can select operating systems.

5. Fine-tuning the Raspberry Pi operating system

Different Raspberry Pi projects require different software, it all depends on your purpose.

For example, if you want to use the Raspberry Pi as a Media Center, you can use NOOBS to install one of the Kodi options.

how to operate the raspberry pi 3

However, you will then have to install available updates, some applications or other extensions you may need such as Vimeo or YouTube, etc.

Like any computer system, installing the operating system is only the first step. You will also have to install updates, software and other tools to use on the Raspberry Pi.

6. Make a copy of the operating system

After you are satisfied with the operating system you installed, the next step is to make a copy of the operating system. The process is similar to creating a computer backup and saving data to the hard drive. Inexpensive SD cards are often easily damaged when disconnected from the power supply, so the smart solution is to create a backup.

There are many tools available to create a full backup image of the Raspberry Pi SD card. You can save the backup to another SD card and use it if there’s a system error.

The above article Taimienphi.vn has shown you how to install the operating system for Raspberry Pi. Obviously Raspberry Pi depends on SD card at one level or another, in addition, you refer to the way Speed ​​up the Raspberry Pi here.

https://thuthuat.taimienphi.vn/cach-cai-he-dieu-hanh-cho-raspberry-pi-45326n.aspx
Writing an operating system to the SD card for the Raspberry Pi is equivalent to installing an operating system, but the process is much faster and easier than installing Windows on an HDD.

.

Add a Comment

Your email address will not be published. Required fields are marked *