How to Reset Samsung printer, fix Samsung printer error hangs

If your Samsung printer has been used for a long time, it will be very easy to get stuck and you do not understand why. The only way is to reset the Samsung printer, restarting everything to its original state to fix the error.

For machines that have been used for a while, there are many reasons for the printer to hang. However, in this article, we want to guide you in case your Samsung device has printed a large number of copies or has been used for a long time and these types of devices are very vulnerable to printer error. does not work, machine hangs.

The real cause comes from software and more deeply from manufacturers including Samsung. More precisely, it is to ensure the reputation of the quality of its products and also the print quality of the products. Manufacturers count and specify a certain number of prints for the machine, when the printer reaches that level, it will automatically hang and can no longer work. More specifically, about 20,000 prints (depending on the model), the machine will not receive cartridges, drum and lead to red light. The only way you can do it is to reset the Samsung printer, reset from the beginning as well as reset the memory counter of the Samsung printer.

Instructions on how to Reset Samsung printer

Step 1: To do this, you must first download the software Go HERE.

Step 2: You must then connect the printer to the computer via a USB cable. Make sure you have the latest printer driver installed and this driver still works.

Note: How to Reset Samsung printers only applies to certain color printers of Samsung and not all color printers can be used.

Step 3: After making sure you have connected to the computer, next turn off the printer power. Wait for the printer to turn off completely and Wait 10 to 15 seconds then open it again until it is there red light status , the machine appears.

Step 4: On your computer, find the “f / w file “depending on phone model and replacement of the file”usbprn2.exe “on the printer using the files downloaded from the link above, the software will now automatically run Command Prompt in about 2 minutes.

How to reset Samsung printer to print from Samsung device 2

Step 5: Wait until the printer has a blue light appears that you have done how to Reset Samsung printer, the Reset has been completed and you can use the Samsung printer as usual.

Above has instructed you how to reset the Samsung printer applied to certain Samsung color printers, helping reset the print counter to the original state. A basic error in the printer that you use a Samsung color printer for a long time should know and fix it. This is also one of the causes of printer error flashing yellow light, red light that mentioned in a recent article.
Also, with a color printer like a Samsung printer, it takes a long time to get rid of many errors, especially if you are lazy to clean, it is likely to cause the wrong printer error and worse, loss of color. Actually using a color printer is a little harder than regular printers, especially the errors that occur around it. Therefore, if you use color printers, you should really pay attention to avoid printer error color or other similar errors.


Add a Comment

Your email address will not be published. Required fields are marked *