Instructions for installing the network for Windows 10 version 1903


The Windows 10 version 1903 version has some small network problems with certain users, the instructions below will help you install the network for Windows 10 version 1903 in case you encounter a network unavailable on 1903 .


After conducting the update of Windows 10 1903 May 2019, there must be a lot of people who will encounter unavoidable minor errors, and one of the many feedbacks Taimienphi.vn received is related to Network installation error for Windows 10 version 1903. Specifically, users can not access the network even though they have installed the full driver, this is a small error in Windows 10 version 1903 so you can fix it quickly through the instructions below. But first if you haven’t used this version yet, please update Windows 10 1903 here already.

Network settings for Windows 10 version 1903

Instructions for installing the network for Windows 10 version 1903

Step 1: To install the network for Windows 10 version 1903, readers just need to follow the instructions below. First, open the tool RUN with the key combination Windows + R then type cmd but note that you do not click OK but instead press the key combination Ctrl + Shift + Enter.

Installation instructions for Windows 10 version 1903 2

Shortly thereafter a blackboard appeared with the line C: Windows system32>That means you have successfully opened the Command Prompt with Administrator rights.

Installing Windows 10 Version 1903 3

Step 2: Starting here we will work with commands to help set up the network for Windows 10 version 1903.

– The first is Type netsh winsock reset then press enter.

Installing Windows 10 Version 1903 4

– Next is type netsh int IP reset then press enter.

Installation instructions for windows 10 version 1903 5

– After typing, please Type ipconfig / relase again then press enter, this command will allow you to remove the IP assigned to your computer.

installation guide for windows 10 version 1903 6

Type ipconfig / review then press Enter, this command requires the system to issue a new IP for your machine.

installation guide for windows 10 version 1903 7

– Finally Type command ipconfig / flushdns To clean the cache, this is essential to ensure everything returns to its new state.

installation guide for windows 10 version 1903 8

Step 3: But the work is still not complete, because we still need to reset the Network, now you open StartMenu up knock network reset and access the found results.

installation guide for windows 10 version 1903 9

Step 4: In this we click reset now to proceed to reboot the network now.

installation guide for windows 10 version 1903 10

Confirm YES Again the network reset.

installation guide for windows 10 version 1903 11

Step 5: Finally, the network notification will reset after 5 minutes, which means restarting the computer. If you do not want to be able to restart the device from now on so no need to do the above.

installation guide for windows 10 version 1903 12

Then you proceed to restart the computer will see the network settings for Windows 10 version 1903, your network will work normally again. and Network installation instructions for Windows 10 version 1903 please end here.

https://thuthuat.taimienphi.vn/huong-dan-cai-dat-mang-cho-windows-10-version-1903-48496n.aspx
Taimienphi.vn hope that with the above guide is very simple, readers will quickly be able to fix the errors they are making. Moreover, Taimienphi.vn also updated an error cover when updating Windows 10 May 2019, the article is a place where you can view and find the errors you encounter and fix them. Windows 10 May 2019 update error with instructions in the post.

.

Add a Comment

Your email address will not be published. Required fields are marked *