Instructions on how to use Auto-Tune better vocal adjustment part 1

Instructions on how to use Auto-Tune to adjust the voice better will be shared by in the article below. Auto-Tune software is being selected by many people to assist in the selection of good vocals.

In the 16 years since its inception (1997), Auto-Tune is considered a recording industry standard for adjusting vocals. On the market, there are many voice editing software, but among them Auto Tune is still the number one software. During the past 15 years there have not been any negative reviews of users about the voice tuning software. this.

How to use Auto-Tune to adjust vocals better than Part 1

Instructions on how to use Auto-Tune better vocal adjustment part 1

There are many users who blame their voice-editing tools like robots, which are not natural. But it is actually the way they set up the software. In the following article, will introduce you to overview of parameters and guide you how to use Auto-Tune to adjust the voice better.

How to use auto tune to make the sound better

Before becoming familiar with Auto-Tune, you need to download and install the software here: Download Auto Tune

The editing mode in Auto-Tune

There are 2 editing modes and 2 ways to use Auto-Tune. In which mode Auto Mode also known as mode “Lazy Mode“(lazy mode), and Graphical Mode or” mode “Auto-Tune“Basically Auto Mode runs in real time, and analyzes the sound as it passes. Then determines what needs to be done to handle the sound.

Adjusting the settings helps you adjust the vocals better, for a more perfect recording. Usually use Auto Mode when you need to mix some songs in a short time.

Graphic Mode is a bit more relevant and used, for better results. Graphic Mode basically works like this: firstly capturing performance after plugging in Auto-Tune to be able to analyze, display and edit audio. (Similar to most other professional voice editing software).

Then choose which notes are adjusted, and how, and the notes stay the same. This way if you want to apply the T-Pain effect, or CHER with Auto-Tune, nothing is too difficult.

Auto Mode

Auto Mode is the default mode when Auto-Tune is opened. This mode is designed to automatically analyze the sound as it passes, and adjust up and down to the nearest note as everything passes.

Pay attention to one of the settings below to restrict Auto-Tune from adjusting unwanted parts, such as vibrato and note, trying to slide from note to note.

– Input Type: This basic setting helps Auto-Tune focus on specific frequency ranges and types based on the type of content you are trying to tune.

how to use auto tune to make the sound better

– Soprano: For female voice or high voice.

– Alto / Tenor: For a normal voice.

– Low Male: For Barry White.

– Instrument: For vionlin, viola and other monophonic instruments.

– Bass Inst: For lower instruments, suitable for tuning guita.

– Scale: Setting scale as the actual key for your song will definitely minimize errors when automatically adjusting. Chromatic is the default scale and is the most popular scale. However, setting the appropriate key of the song will narrow down the adjustment options from 11 notes to 7 notes for a specific key.

For example, in your song, the key “C ‘” is not sharp or unclear. The singer will try to sing “C” key more clearly. If the note is sung close to the “C #” note, Auto-Tune will try to adjust the note up to “C #”, and the result will be inaccurate. If the scale is set to C Major in this same scenario, the singer must sing through the “C #” key to create and fix errors and try to fix it to “D”.

As you can see in the image below, you can select many different scale options. Auto-Tune is used all over the world, and there are many different scales available to users around the world using alternative adjustments and scales. Instructions on how to use Auto Tune to adjust the voice better will help you adjust, select the scale most suitable.

How to use auto tune to make the sound better

– Retune Speed: One of the most important settings to note. Retune Speed ​​sets the speed of Auto-Tune fast or slow to adjust notes. Quick time setting will remove pitch variations but the resulting tuning is not natural. This is an important step in creating the T-Pain / Cher effect.

How to use auto tune to make the sound better

Humanize: This setting allows notes to try to maintain a slower Retune speed compared to short notes. Normally, you will start to set the 0 while the Retune speed setting ensures that all the notes to be adjusted are being adjusted, then adjust the Humanize to help the note maintain the Retune speed, not to adjust it too much. tall, while still fast enough to adjust notes with a shorter duration.

Natural Vibrato: This setting is independent of pitch settings, and is used to tame the natural vibrato of performance. Keeping the default setting to 0 will not affect the initial vibration, but adjusting the amount of vibration will be allowed.

Targeting Ignores Vibrato: Turning on this feature can help Auto adjust to try to adjust and ignore what. If your song has a lot of vibration, try turning this feature on to see if it helps.

– Target Notes Via MIDI: This setup is quite interesting when playing music with fast Retune speed. When used, Auto-Tune will do nothing until the MIDI note appears from the MIDI song or keyboard, then it will switch to the current MIDI note. Then, the singer can play the song in tune from the MIDI device and the track will be adjusted to the content they play.

Graphic Mode

Graphic Mode is the mode you use most often if your main concern is recording quality. The advantage is that the Graphic Mode allows you to specify which notes are adjusted and which ones are not, along with independent settings for each tuned note, instead of using the common settings for each note passing in the mode. Auto Mode.

– Correction Mode to Graph: Slide or click on edit mode from Auto to Graph.

How to use auto tune to make the sound better

– Options: Click the options button next to Correction mode, next:

How to use auto tune to make the sound better

+ Enter buffer seconds: The default here is 240 seconds, i.e. 4 minutes at a sample rate of 44.1k or 48k, based on session settings. Songs that require 300 seconds do not need to set a high actual number of buffers as it will consume a lot of system RAM. Set up to 14400 for 4 hours.

+ Default Retune speeds: You can set the default Retune speed for different adjustment settings.

In the article on how to use Auto-Tune to adjust the voice better than Part 1 above, introduced you to the modes in Auto-Tune. In the article Instructions on how to use Auto-Tune to adjust the voice better than part 2, will introduce you more about how to set up Auto-Tune to adjust the voice.
Also, you can refer to some Audio editing application Best of 2017 to improve your sound quality.


Add a Comment

Your email address will not be published. Required fields are marked *