Tenda AC10U is an AC1200 standard dual-band WiFi router that generates Wifi signals with a powerful configuration with 1GHz CPU and 128MB of DDR3 Ram giving you the best usable performance in both 2.4GHz and 5GHz bands.
Tenda AC10U WiFi dual band standard AC1200 possesses powerful configuration, high Ram memory
How to change the Wifi password Tenda AC10U
To install Tenda AC10U or change the wifi password of Tenda AC10U please follow the steps below:
Step 1: You need to plug in the power for the Router -> Then use the network cable to connect the Internet to the device. You attach to the WAN port (blue) on the Tenda AC10U to connect.
Next, you observe the WAN lights are lit up, ie your connection has been successful.
Step 2: Using Laptop computer to connect to Wifi Tenda AC10U, this time the Modem will have Wifi network named as circled in red below and do not have a password.
Step 3: Open a web browser -> then enter the default address bar as: 192.168.0.1 -> then press Enter to access.
You press the button Start to begin
Step 4: Select the mechanism to connect. Show mechanism Dynamic IP Address Used is common -> so you choose Dynamic IP Address -> then press next to continue
You make further choices:
– Select the mode as Transmit Power: High
– Name the Wi-Fi
– Set a Wi-Fi password
– You tick the box Set the WiFi password as the login password of the admin account If you want the same login password and Wifi password.
– Set password to login to the configuration website.
Step 5: Installation was successful, you should be able to connect to the new Wifi name
You go to the wifi connection -> then find Wifi with the name you just put -> then make a connection as usual.
Step 6: Go to this step, you will revisit the Tenda configuration website -> then enter the web login password that you just reset above.
You will see the interface Internet Status showing the status of successful connections, you can see how many people connect, how many USB connections.
You can go to the item Wifi Setting to customize wifi and reset wifi password if you want. In addition, you can also set other customizations such as: Wifi Name & Password, Wifi Schedule, Wireless Repeating, Channel & Bandwidth …
Suppose you choose Wifi Name & Password (wifi name and password) -> interface after you choose will look like the picture below:
Part 2.4 GHz Network -> You can give Wifi a name, then select the security mode and enter the password to log in.
Part 5 GHz Network The default will be off, with 5GHz network, the network will be stable and speed will be better, but this network also limits the device can receive reception.
To set it up, you also click as described in the image below, and will display the information for you to set up as above. 2.4 GHz Network
After setup is complete, click Save to save is completed.
So with just a few steps above, you have setup yourself, Change Wifi password Tenda AC10U Success. With the Tenda AC10U wifi, you can use it in both bands of 5GHz with speeds of up to 867Mbps and 2.4GHz to reach 300Mbps.
Besides, if you unfortunately encounter Wifi error but cannot still see the connection, there is still a signal but do not know the cause and how to handle it, immediately refer to the article fix wifi not connect to the network has been shared by Taimienphi.vn to know how to do it. Good luck!