The problem of computer error Boot into Windows 10 is not uncommon, especially when the UEFI and Legacy standards are not as clear as today. To be able to error the computer Boot into Windows 10 you need to follow the following instructions.
There are many causes Boot computer error into Windows 10 one of them is the wrong format or Windows 10 must be correct UEFI as said. But it could also be due to an unintended error. Checking and fixing computer errors Boot error into Windows 10 It is quite difficult and usually we do not have many options for this problem.
Before proceeding to install Windows 10 with UEFI standard from the beginning, try following our suggestions to fix a computer error with Boot into Windows 10. Because the install Windows 10 with UEFI standard It will take more time and this is the last measure that you should apply if the previous methods did not work.
Instructions to fix a computer error with Boot into Windows 10
1. Check the drive interface standard.
If you are using a laptop, you don’t have to do this step by default, because the current laptop model is AHCI, and if you are working on a desk, you will have to check whether you have AHCI or IDE. This is the basic step to help you fix the computer with Boot error in Windows 10.
Step 1: First you have to see how enter the BIOShere before, to gain access to the machine’s BIOS. In the BIOS interface, go to the section Advanced.
Note: Each model may have different BIOS interface but the basic items are the same.
Step 2: You go on SATA Configuration to see what the standard hard drive is using.
Step 3: If as AHCI leave it alone, otherwise you have to proceed with changing it to AHCI.
2. Turn off the Secure Boot Menu function
In some devices, there will be a Secure Boot Menu function, if you enable this function, it is likely that the computer error of Boot into Windows 10 will happen immediately. The work to be done is to check Secure Boot Menu is off or not. If it is on, you must turn it off immediately,
You then proceed to reboot when selected Save change and Exit right away.
3. Activate boot mode on the device
Step 1: In some cases, Boot mode is turned off, now go back to the BIOS, then at Boot section Enabled Launch CSM up.
Step 2: Continue Enabled Launch PXE PpROM Policy again.
Step 3: You then proceed to reboot when selected Save change and Exit right away.
There is also an additional way you go directly in Boot Override to access Windows directly, but this is not a way to fix a computer error with Boot into Windows 10 thoroughly.
The above is a solution to help you get a faulty computer Boot into Windows 10, and as mentioned above, the ways have been tested by Taimienphi.vn, capable of helping you fix a computer error with Boot. on Windows 10. However, there are exceptions, or it may be because you didn’t do it correctly.
Anyway, the fastest way is to reinstall Windows 10 in accordance with UEFI standard to save less time if you can not fix the computer with Boot error in Windows 10. Also you should refer to how to create Windows 10 UEFI standard USB installation here, work create USB to install Windows 10 with UEFI standard will help you simplify the installation of Windows 10 and especially the 100% UEFI standard.