Have you ever installed a computer, PC from A to Z, if you can afford a new computer or clean it, instead of having an external repairman why not install the CPU yourself? count. The following steps to install a PC are an indispensable reference for you
Completing a computer requires many steps installation, from self-installing CPU steps to a computer to RAM or VGA and other components. It seems that the stages are very complicated and PC installation steps for you is impossible. But do not rush to think like that if you have finished reading this article of our guide Self-installing steps for CPU for computer, steps for installing PC.
If it is not possible to buy a new computer to install itself. Why not use an old computer, the ones you need to clean your computer to practice for this article. However, Taimienphi.vn also recommends that readers should consider carefully when conducting this procedure.
Self-installing steps for CPU for computer, steps for installing PC
The components to be installed in this article:
– Computer case – Main – Motherboard
– Chip – CPU of the computer
– RAM – Internal memory
– HDD – Hard drive
– VGA – Video card
– Computer power
– Radiator fan
– Block main
– Sata cape cord, power cord.
– Fill screw with 4 edges.
– Thermal paste
Perform the self-installation CPU steps for the computer, the steps to install the PC
Step 1: First we proceed to remove the baskets so that we can install parts of the computer. In the back of the case is a total of 4 screws that can be easily screwed by hand, then pull the hip of the case to reveal the inside of the body.
Step 2: Usually the current machine models have the power on the bottom, in addition, we can see the location corresponding to the source on the machine and install, conduct screws when the source is fixed.
Step 3: Next, install the Block for the main, fixed components and only compatible with that Main type to help protect the Main from external influences. Looking at the case, you will immediately see the corresponding position of this component.
Step 4: After installing the power, you pull all the cables, the source of the machine and other components back to post to increase the aesthetics.
Step 5: The steps to manually install the CPU for the computer are as follows: Put up the Main latch, remove the main chip protection plate, this stage you really do it because it can cause the main state of the motherboard.
Step 6: For chip mounting, compare the 2 edges of the chip corresponding to the Main position and insert.
Step 7: put slowly into the Main in accordance with the identified positions in the previous step to avoid channeling, which is easy to damage the Main pins.
Step 8: Then close the Main latch as it was drafted.
Step 9: On the side of the RAM chip is installed, you pull the two RAM pins to the sides and then compare the RAM slot with the Main and plug straight down.
After plugging in, close the latch.
Step 10: Fixing the Main into the computer case, you can see up to 9 places where you need to screw in.
Step 11: To fix the Main, you just need to find the Block for the Main and install it accordingly, in addition, there are holes where you can screw in.
Step 12: Proceed to supply power to Main via pin 20 available on main and power.
Step 13: Proceed to install the Main post block to fix the VGA to the front if using separate types of heat sink, and if it is a conventional heat sink, you just need to screw in.
Step 14: In the front post, put the glue on the chip and the fan then install the corresponding 4 seats to screw on the Main
Screw down to make sure the heat sink is working properly.
Step 15: Install the audio signal cord on the bottom of Main, next to the power source, locate it and plug in it.
Step 16: Refer carefully to the following diagram to correctly install the power cords, turn off, Restart the machine for the buttons on the Case to work. Thankfully, you can plug in it to try and do no harm to the Main.
Step 17: Different types of Main will have different arrangements, but the most important two features Power – shutdown, turn on and Restart – restart the machine works.
Step 18: Proceed to insert the hard drive into the tray contained in the case, screw it to locate the hard drive.
Step 19: Then insert the power cord from the power source into the hard drive, standard Sata.
Step 20: The next step in the PC installation steps is to use a standard Sata cable from the Main to the HDD.
Step 21: Plug directly into the HDD, rotate to the right for plugging.
Step 22: At the VGA mounting part, you proceed to install the case latches, these bars fix the VGA as well as prevent dust from entering the machine.
Step 23: To horizontal VGA and then plug directly into the slot PCIx16, note that you need to see the VGA pins before plugging for a match.
Then fix with screws to avoid heavy VGA socket break.
Step 24: Conduct auxiliary power for high-end VGAs, GAs need a lot of power.
After this stage, you just need to plug in and install, the steps to install the CPU for the computer as well as the steps to install the PC are complete. You have installed a computer with the most important components.
Above Taimienphi.vn has guided you through the steps of manually installing the CPU for the computer, the steps for installing a PC. After this stage is computer installation steps, use. You should also research a bit before performing offline.