You always get weak signal due to the baffles between the floors that WiFi devices can not broadcast to. If you have an old WiFi or increase the WiFi signal for WiFi transmitters up, including the old modem too. The following guide will help you how to increase WiFi signal for WiFi transmitters for stronger waves.
Free Download has introduced you 9 Ways to increase Wifi signal the best, However, sometimes you still feel dissatisfied with the speed of your home wifi, especially when you use the wifi in the rooms, If you have or find more old wifi transmitters, use immediately to speed up the credit. My wifi signal offline.
Job Increase WiFi signal for WiFi transmitters is necessary in case your WiFi signal is too weak and cannot receive the signal in the area you want. The WiFi device is only limited, so if you want to increase the WiFi signal, this article is useful for you.
Up to now, Taimienphi.vn only instructed you to read how to play WiFi with laptop, Turn your laptop into a hotspot But that is the case Use your laptop as a WiFi transmitter in temporary case. For now, we will use a device like a repeater that captures the signal and amplifies it many times to increase the WiFi coverage of your home.
Increase WiFi signal for WiFi transmitter, increase WiFi signal for old Modem
Step 1: First you need to prepare the old unused Modem, requires it to be a WiFi emitter, if it is Tp, then priority R941N and R841N series because of these 2 lines Support Reapeater Mode and WDS mode .
Step 2: Turn on the WiFi Modem and go to the default address posted on the back of the device, probably 192.168.1.1, 192.168.0.1 Depending on the type and enter the account password and the default password listed on the device offline.
Step 3: After successful login we start to increase the WiFi signal for WiFi transmitters by going to Wireless> Wireless Settings Then name the name SSID – WiFi name, enable Enable WDS and then click Survey .
Step 4: In the Survey is the list of available WiFi, click and select the main WiFi of the network you are using and then click Connect Please.
Step 5: After the selection is made, you move Key Type to the mode corresponding to your home WiFi Modem, usually the standard WPA-PSK / WPA2-PSK as in the picture. After selecting, please Save to.
Note: Channel of Repeater and WiFi Modem must be the same channel.
Step 6: After this step you click on click here to reboot the device.
Clik continued on Reboot Let the modem reboot.
Step 7: Wait for the WiFi Modem to reboot and go to the newly created WiFi.
Step 8: Access to DHCP and turn off DHCP Sever mode then Save again. This operation also requires a reboot, so follow the steps above.
After Reboot, restart it again and we have finished increasing the WiFi signal for the WiFi transmitter, you can put WiFi in the places where the main wave catches and replay to increase the area for WiFi transmission for my house.
Increasing the WiFi signal for an old Modem, turning a WiFi Modem into a repeater is a good method to help you increase the broadcast area, but not always the quality of the signal is as desired and make sure the signal you receive is not. equal to the original WiFi speed already.
We now have 4G speeds and in theory it is faster than regular wired networks on computers. Therefore, we can completely play WiFi by phone so that other devices can connect to. The WiFi broadcast on the phone is also very well supported, does not take too much time and the same broadcast quality you use directly.